Wednesday, May 9, 2012

Configuring D-link DSL-2730U Wireless N ADSL2+Router to connect BSNL broaddband

hi friends, this post will give you details about auto configuring d-link modem to connect bsnl broad band.



Insert the CD came with your modem.   
  •    Then you can see the interface shown below
  •    Click on the start button
  •    It will take some time to start, wait patiently. For me it took 5min

Power up the Device 
  •     Connect the ADSL Cable (Telephone Cable) to modem.
  •     If your connection don't have any problem then the DSL LED will blink for some time and then it light as shown in figure.

  

Connect the device to computer using LAN  cable

 
  
ISP confguration
 Select the values as shown in  figure below.



Give your broadband account name and password
  The account name will be like this "id10giti phone number_scdrid" (no space) and your password is "password".



Set wireless connection
  •  Give wireless SSID as you like (This name will be displayed when you switch on your wifi )
  •  Select Channel : any value
  •  Network Authentication: Please don't leave it none, because your neighbors may connect internet through your modem and they can even hack your system. 
  • WEP key : you can use auto generated key or give your own key.
  •  Note down SSID and key
Checking Connection
  •  If every thing is fine the internet light will blink green
  •   If you given wrong user name or password this LED will be RED

Finished 
 Now you can connect to internet. 
 


If you have any problem please don't hesitate to comment  

              Watch the presentation. 






 



Posted by at
Labels:

31 comments:

  1. UnknownMarch 24, 2013 at 9:48 PM

    Hi, I'm using BSNL Home 500 Combo Plan speed upto 2 Mbps, with the same modem. My problem is that the internet connection goes to disconnect & reconnect after some times & this process is going on. Besides it can't give proper speed; its almost 10-20 kbps & very few times 200 kbps. Is my modem defected or any settings problem?

    ReplyDelete
    Replies
    1. Jithin ParakkaMarch 25, 2013 at 3:46 AM

      Hi Sujay hope you followed all the steps I described above. Some times connection may lose and speed will reduce due to damage on the telephone cable. (it happened to me). If you are getting any disturbance in Land phone during call change the telephone cable that is coming to your main junction box. (call bsnl cc)
      If you are living in rural area at least 20 KM away from main town you will not get the exact connection speed they mentioned.
      Thank you

      Delete
  2. Tanveer Hossain MullickMarch 25, 2013 at 10:17 AM

    is telephone connection is mandatory for 2730u router ?? plz reply me soon !!.......

    ReplyDelete
    Replies
    1. Jithin ParakkaMarch 25, 2013 at 10:45 AM

      Tanveer I didnt get your question.
      I hope in your place BSNL is providing broadband over slandered Land Line connection.

      Delete
  3. NinjaMay 24, 2013 at 8:51 AM

    thank you above instructions helped a lot.

    ReplyDelete
  4. ROHAN MATHKARJune 26, 2013 at 10:41 PM

    hey i followed all the steps...but at last when the procedure completes at 100 percent...there is a pop up that says "check your dsl and internet settings"..and the last light on the router turns red...sometimes yellow..and sometimes is completely off...can u tell me what the problem is ?? have i missed something during installation ???? i am using MTNL...I HAD RESET THE ROUTER MANY TIMES AND TRIED AGAIN.....please can u help me with this !!

    ReplyDelete
    Replies
    1. Jithin ParakkaSeptember 8, 2013 at 6:43 PM

      Rohan above described procedures are for DSL connection, Sorry I dont know details of MTNL connection.
      Contact BSNL CC


      IF your problem solved please replay with the solution you did. It will be helpful o other users.

      Delete
  5. UnknownAugust 30, 2013 at 7:02 AM

    hey i have d'link 2730U modem... its working fine 3 to 4 months but after something happen then its link leg is flashing continuously and can't stable so than my modem show unconfigured.. 100 time i configure it but still it show unconfigured what to do can you tell me.. i am using now UT300R2U it connect with same link but not my 2730U

    ReplyDelete
    Replies
    1. Jithin ParakkaSeptember 8, 2013 at 6:40 PM

      Are you sure that you didn't change the configuration after 4 months ?

      Delete
  6. UnknownSeptember 8, 2013 at 9:36 AM

    I purchased Dlink DSL-2730U Modem. Even after settings change, Internet is not working. DSL LED light is continously Blinking & Not getting steady. Problem is not with BSNL Phone Line as on the same line my Old ZTE modem is working well is steady DSL LED & Internet is working well.

    ReplyDelete
    Replies
    1. Jithin ParakkaSeptember 8, 2013 at 6:38 PM

      If the problem is not with the telephone line and since your old phone ZTE is modem is not working, there may be some mistake in your new modem configuration. Make sure you given the correct user name and password.

      Delete
  7. UnknownSeptember 17, 2013 at 9:07 PM

    I have same problem my ADSL link frequently dropped even all setting are ok and ADSL line is working fine with other modem how to fix the problem pls help...thank u

    ReplyDelete
  8. UnknownSeptember 23, 2013 at 7:51 AM

    At the end of the set up i am getting the error "internet connection failed. verify your username and password or contact the service provider". The same user name and password works perfectly fine with UT300R2U modem and the internet connection also works fine with this modem. But i am unable to connect using DLINK 2730U

    ReplyDelete
    Replies
    1. Jithin ParakkaOctober 21, 2014 at 8:35 PM

      Verify your VCI and MTU values are as given in the picture

      Delete
  9. prasadreddyOctober 16, 2013 at 4:46 AM

    hi.....Jithin
    this site help ful to my problm....
    thnk you jithin

    ReplyDelete
    Replies
    1. Jithin ParakkaOctober 21, 2014 at 8:29 PM

      Dear Prasad Thank you for your replay. Usually people who got the problem solved never replays. Thank you very much

      Delete
  10. Face2FaceNovember 9, 2013 at 6:53 AM

    Hi,I am purchasing new d-link modem, dsl-2730u,But it not working properly.It continuously blinking and not connecting. So I am changing to another modem,and it working properly why?My telephone line is very perfect.How can solve it?

    ReplyDelete
  11. UnknownApril 22, 2014 at 1:14 PM

    i dont have any telephone line. then how can i connect this modem. please help me

    ReplyDelete
    Replies
    1. Jithin ParakkaOctober 21, 2014 at 8:21 PM

      Dear Sravan this modem can only be used with the telephone connection

      Delete
  12. Ranjit kumarJuly 4, 2014 at 1:39 AM

    My modem power led Stands solid red... Dono y....breply please.....

    ReplyDelete
    Replies
    1. Jithin ParakkaOctober 21, 2014 at 8:31 PM

      Power LED red menas System failure. Contact your nearest D-link service center

      Delete
  13. UnknownAugust 14, 2014 at 8:07 AM

    adsal connection went automatic .

    ReplyDelete
    Replies
    1. Jithin ParakkaOctober 21, 2014 at 8:33 PM

      Lift your Landline Phone receiver and check any noise is coming. If yes change the wire .

      Delete
  14. UnknownJanuary 11, 2015 at 11:46 PM

    Hi, iam using D-link dsl 2730u ADSL modem with Bsnl connection. The power indicator is red which should be green I even updated the firmware several times but nothing works,
    Please suggest me a solution

    ReplyDelete
  15. UnknownJune 5, 2016 at 2:33 AM

    Hi I am using d link 2730u from 6 days yesterday I reset it after reset it shows red light. How do I again configure it.

    ReplyDelete
  16. UnknownAugust 1, 2016 at 8:41 AM

    Hi i shifted my bsnl connection. Before shifting it is working fine but now only power led and wifi led showing green.but rest led not blinking.but initial all led showing green as power on the modem please help

    ReplyDelete
  17. UnknownFebruary 14, 2017 at 7:42 AM

    Hi, I am using d-link DSL 2730u , DSL Led is steady green , but internet led status nothing display & not get connected to internet , please suggesst me solution

    ReplyDelete
  18. UnknownFebruary 27, 2017 at 6:09 AM

    Hello,
    I am trying to connect the same router to computer, but the internet led showd red signal even when the DSL led is green constantly. Is there any problem with ISP or configuration

    ReplyDelete
  19. Linux LionApril 5, 2017 at 11:11 AM

    Hi,
    I am using Dlink 2730u ADSL for Bsnl broadband connection,but i'm facing light blinking issue in the DSL and speed of the internet suddenly gets reduced.I'm using 8mbps plan.
    I would like to know if i reduce the speed of internet to 2mbps or 4mbps will my internet connection become stable?
    Kindly help me.

    ReplyDelete
  20. UnknownJanuary 28, 2019 at 4:58 PM

    give any one software download link

    ReplyDelete

Subscribe to: Post Comments (Atom)